How to change the listening port for Remote Desktop

How to change the listening port for Remote Desktop

Let me fix it myself

To change the port that Remote Desktop listens on, follow these steps.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

1. Start Registry Editor.
2. Locate and then click the following registry subkey:
   HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3. On the Edit menu, click Modify, and then click Decimal.
4. Type the new port number, and then click OK.
5. Quit Registry Editor.
6. Restart the computer.

Note When you try to connect to this computer by using the Remote Desktop connection, you must type the new port. Maybe you have to set the firewall to allow the new port number before you connect to this computer by using the Remote Desktop connection.

How to hack or crack IDM manually.

Step 1: Download the IDM trial or If you already have IDM installed Update it by going to Help---}} then to check for Updates. If you don&...

 

 

Step 1: Download the IDM trial or If you already have IDM installed Update it by going to Help---}} then to check for Updates. If you don't wanna update your version, Just click on Registration.

Step2: When you click on registration, Now a new dialog appears that is asking for Name, Last Name, Email Address and Serial Key.

Step3: Now Enter you name, last name, email address and in field of Serial Key enter any of the following Keys:

RLDGN-OV9WU-5W589-6VZH1
HUDWE-UO689-6D27B-YM28M
UK3DV-E0MNW-MLQYX-GENA1
398ND-QNAGY-CMMZU-ZPI39
GZLJY-X50S3-0S20D-NFRF9
W3J5U-8U66N-D0B9M-54SLM
EC0Q6-QN7UH-5S3JB-YZMEK
UVQW0-X54FE-QW35Q-SNZF5
FJJTJ-J0FLF-QCVBK-A287M And click on ok to register.

Step4: Now after you click ok, it will show an error message that you have registered IDM using fake serial key and IDM will exit. Now here the hack starts.

Step5: Now Go to START --}} Then go to RUN and type the following text and click enter:
notepad %windir%\system32\drivers\etc\hosts
For Windows 7 users, due to security reasons you will not be able to save hosts file.
First of all go to C:/ drive then go to Windows Folder and then go to System32 folder and then go to Drivers folder and then go to Etc Folder, in the Etc folder you will see the hosts file. Now right click on hosts file and go to its properties, then go to security tab and then select your admin account, just below u will see an edit button (in front of change permissions), Now give the user full control and write and read rights and then click on apply and then click on Ok, now u will be able to edit the hosts file and save changes in it.

Step6: Now a notepad file appears something

Now copy the below lines of code and add to hosts file as shown above:

127.0.0.1 tonec.com
127.0.0.1 www.tonec.com
127.0.0.1 registeridm.com
127.0.0.1 www.registeridm.com
127.0.0.1 secure.registeridm.com
127.0.0.1 internetdownloadmanager.com
127.0.0.1 www.internetdownloadmanager.com
127.0.0.1 secure.internetdownloadmanager.com
127.0.0.1 mirror.internetdownloadmanager.com
127.0.0.1 mirror2.internetdownloadmanager.com

After adding these piece of code, save the notepad file. And exit from there. Now start your Internet download manager, and now you IDM has been converted to full version and specially when you update next time, your registration will not expire. That means it will remain full version for life time and you can update it without any problem.

There is no disk in the drive. Please insert a disk into Drive\Device\Harddisk1\DR1

i suppose these simple steps might help you;
start you computer
go to start button
run
type regedit (this will open the registry Editor )
go to HKEY_ LOCAL _MACHINE
SYSTEM
CurrentControlSet
control
windows( this will open  a list on the right side of the window)
go to error mode
this will open edit DWORD Value window
change the value data from 0 to 2
then change base to Decima then press ok button
then on the registry editor window, go to view tab and press refresh
close the window and restart your computer.
THE ERROR WILL BE SUPPRESSED.
THE PROBLEM OCCURS DUE TO AN INFECTION BY A VIRUS IN YOUR COMPUTER.
I HOPE THIS WILL SOLVE YOUR PROBLEM

Verifying License… AutoCAD not responding… Crash!

Posted on July 1, 2014 by simonbooth

Windows 10, Windows 7, Windows 8 and Windows 8.1 users (32bit and 64bit) – If you are encountering Autodesk licensing issues such as blank Authorization code (authcode) screens or even crashing on startup with messages like “Verifying license…” then “AutoCAD has stopped responding” when launching AutoCAD, it could be caused by:

1. The July 2014 Windows Security Update KB2962872
   1. these KB’s may also affect your system too – KB2943357, KB2977629 and KB2976627
2. You are using a version of Microsoft Internet Explorer which is not compatible with your version of AutoCAD

NOTE: If you are primarily seeing script errors, then first check out how to enable scripting support in IE 11
Here is a list of AutoCAD versions (and other similarly labeled Autodesk products too) that most likely will be affected…

• AutoCAD 2005
• AutoCAD 2006
• AutoCAD 2007
• AutoCAD 2008
• AutoCAD 2009
• AutoCAD 2010
• AutoCAD 2011
• AutoCAD 2012
• AutoCAD 2013
• AutoCAD 2014

Windows Security Update KB2962872
This update can causes all Autodesk products to crash on licensing verification specifically when using these newer versions of Microsoft Internet Explorer

• Internet Explorer 10
• Internet Explorer 11

You can very easily uninstall KB2962872 using these short steps:

1. Open your Windows Control Panel
2. Navigate to Programs
3. Click View Updates
4. Now search for KB2962872, if KB2962872 is listed there, simply select it in the listbox and then click uninstall
5. Let your machine take a while to think, now reboot.
6. Now try your Autodesk product again.

If the KB2962872 doesn’t solve the problem, these KB’s may also affect your system – KB2943357, KB2977629 and KB2976627
Another reason is that because you have Microsoft Internet Explorer 11 installed on your system. The solution is to rollback to Microsoft Internet Explorer 10, or maybe back as far as Internet Explorer 8
Failing that, I did find this link on the Autodesk website regarding ‘Script Errors in AutoCAD activation‘ – perhaps it helps  somehow.